| Nom De Marque: | JFDL-Separation bearing |
| Numéro De Modèle: | 3151 000 493 |
| Nombre De Pièces: | 1 pièce |
| Prix: | Négociable |
| Détails De L'emballage: | Carton unifié, emballage avec papier bulle à l'intérieur et filmé à l'extérieur. Les gros ar |
| Conditions De Paiement: | LC, D/A, D/P, T/T, Western Union, MoneyGram |
| Information Sheet | |
| Parameter | Details |
| Product Name | for Sachs 3151 000 493 Clutch Release Bearing |
| Part Number | 3151 000 49,000 254 32 08, 003 250 80 15,1686642, 1697725 |
| Performance Parameters | KZISZ-5 |
| Shift Fork Type | Only applicable to release forks with rollers |
| Seal Type | High-performance labyrinth seal |
| Material | High-strength reinforced bearing steel |
| Operating Temperature Range | Typically withstands temperatures from -40°C to +160°C. Internal grease will not dry out under the instantaneous high temperatures caused by frequent starts. |
| Hardness Standard | The surface of the contact thrust ring is high-frequency hardened, typically achieving a hardness of HRC 58-64 to counteract the continuous friction of the pressure plate spring fingers. |
![]()
![]()
![]()
| Nom De Marque: | JFDL-Separation bearing |
| Numéro De Modèle: | 3151 000 493 |
| Nombre De Pièces: | 1 pièce |
| Prix: | Négociable |
| Détails De L'emballage: | Carton unifié, emballage avec papier bulle à l'intérieur et filmé à l'extérieur. Les gros ar |
| Conditions De Paiement: | LC, D/A, D/P, T/T, Western Union, MoneyGram |
| Information Sheet | |
| Parameter | Details |
| Product Name | for Sachs 3151 000 493 Clutch Release Bearing |
| Part Number | 3151 000 49,000 254 32 08, 003 250 80 15,1686642, 1697725 |
| Performance Parameters | KZISZ-5 |
| Shift Fork Type | Only applicable to release forks with rollers |
| Seal Type | High-performance labyrinth seal |
| Material | High-strength reinforced bearing steel |
| Operating Temperature Range | Typically withstands temperatures from -40°C to +160°C. Internal grease will not dry out under the instantaneous high temperatures caused by frequent starts. |
| Hardness Standard | The surface of the contact thrust ring is high-frequency hardened, typically achieving a hardness of HRC 58-64 to counteract the continuous friction of the pressure plate spring fingers. |
![]()
![]()
![]()